Loading store…

by Raspberry Pi
SKU: PSA-CMP-RPI5-4G
No reviews yetTypical India street price
₹5,500–₹9,000
Next-gen school SBC — faster CPU/GPU for OpenCV, coding clubs, and kiosks.
Interface: GPIO, HDMI, USB3, CSI, I2C, SPI, UART
Great for Thonny + MicroPython; pin map differs from NodeMCU kits.
Open PSA LabGet notified if we start selling this part
A single-board Linux computer. Unlike Arduino, it runs a full OS (Raspberry Pi OS) so students use Python, browsers, and cameras natively.
Broadcom BCM2712 quad Cortex-A76 class SoC with VideoCore VII. GPIO is 3.3 V only. PCIe FPC on Pi 5 enables HATs and NVMe adapters. Power demands are higher than Pi 4 — undersized chargers cause throttling and SD corruption. In the classroom, treat Raspberry Pi 5 (4 GB) as a intermediate part using GPIO, HDMI, USB3, CSI, I2C, SPI, UART. Typical India street price is about ₹5500–₹9000. Always verify voltage and pin labels on your exact module — silk screens vary across clones. Start with a datasheet or trusted learn guide, power the part correctly, share GND with the MCU, and test with a simple blink/read sketch before building the full project. Measure voltages with a multimeter when something fails, and keep actuator current off the MCU regulator.
Flash Raspberry Pi OS to microSD (or NVMe), boot, enable SSH/VNC, then use gpiozero or lgpio for pins. Camera uses libcamera / rpicam tools.
| RAM | 4 GB |
| SoC | BCM2712 |
| Logic | 3.3V GPIO |
| Video | 2× micro-HDMI |
| Category | Microcontrollers |
| Difficulty | Intermediate |
| Voltage | 5V USB-C ≥5 A recommended |
| Interface | GPIO, HDMI, USB3, CSI, I2C, SPI, UART |
40-pin header (3.3 V logic). Pin 1 = 3V3. Same BCM numbering family as Pi 4 with some differences — check Pi 5 pinout docs.